Coats ProRide Wheel Balancer User Manual download pdf (Page 3)

Important: Always read and follow instructions. • iii

Owner’s Responsibility

To maintain machine and user safety, the responsibility

of the owner is to read and follow these instructions:

• Follow all installation instructions.

• Make sure installation conforms to all applicable

Local, State, and Federal Codes, Rules, and Regula-

tions; such as State and Federal OSHA Regulations

and Electrical Codes.

• Carefully check the unit for correct initial function.

• Read and follow the safety instructions. Keep them

readily available for machine operators.

• Make certain all operators are properly trained,

know how to safely and correctly operate the unit,

and are properly supervised.

• Allow unit operation only with all parts in place and

operating safely.

• Carefully inspect the unit on a regular basis and

perform all maintenance as required.

• Service and maintain the unit only with authorized

or approved replacement parts.

• Keep all instructions permanently with the unit

and all decals/labels/notices on the unit clean and

visible.

• Do not override safety features.

Operator Protective Equipment

Personal protective equipment helps make tire ser-

vicing safer. However, equipment does not take the

place of safe operating practices. Always wear durable

work clothing during tire service activity. Loose fitting

clothing should be avoided. Tight fitting leather gloves

are recommended to protect operator’s hands when

handling worn tires and wheels. Sturdy leather work

shoes with steel toes and oil resistant soles should be

used by tire service personnel to help prevent injury

in typical shop activities. Eye protection is essential

during tire service activity. Safety glasses with side

shields, goggles, or face shields are acceptable. Back

belts provide support during lifting activities and are also

helpful in providing operator protection. Consideration

should also be given to the use of hearing protection if

tire service activity is performed in an enclosed area, or

if noise levels are high.

Definitions of Hazard Levels

Identify the hazard levels used in this manual with the

following definitions and signal words:

DANGER

Watch for this symbol:

DANGER

It Means: Immediate hazards, which will result in

severe personal injury or death.

WARNING

Watch for this symbol:

WARNING

It Means: Hazards or unsafe practices, which could

result in severe personal injury or death.

CAUTION

Watch for this symbol:

CAUTION

It Means: Hazards or unsafe practices, which may

result in minor personal injury or product or property

damage.

Watch for this symbol! It means BE ALERT! Your

safety, or the safety of others, is involved!

1 2 3 4 5 6 7 8 ... 33 34

Comments to this Manuals

No comments

Coats ProRide Wheel Balancer User Manual Page 3

Comments to this Manuals

Related products and manuals for Equipment Coats ProRide Wheel Balancer