Coats ProRide Wheel Balancer User Manual download pdf (Page 2)

ii • Important: Always read and follow instructions.

READ ALL INSTRUCTIONS

1. Eye and face protection recommendations:

“Protective eye and face equipment is required to

be used where there is a reasonable probability

of injury that can be prevented by the use of

such equipment.” O.S.H.A. 1910.133(a) Protective

goggles, safety glasses, or a face shield must be

provided by the owner and worn by the operator

of the equipment. Care should be taken to see

that all eye and face safety precautions are fol-

lowed by the operator. ALWAYS WEAR SAFETY

GLASSES. Everyday glasses only have impact

resistant lenses, they are not safety glasses.

2. Do not disable hood safety interlock system, or in

any way shortcut safety controls and operations.

3. Be sure that wheels are mounted properly, the

hub nut engages the arbor for not less than four

(4) turns, and the hub nut is firmly tightened

before spinning the wheel.

4. Read and understand this manual before operat-

ing. Abuse and misuse will shorten the functional

life.

5. Be sure the balancer is properly connected to the

power supply and electrically grounded.

6. Do not operate equipment with a damaged cord

or if the equipment has been dropped or dam-

aged – until it has been examined and repaired by

a qualified serviceman.

7. Do not let cord hang over edge of table, bench, or

counter or come in contact with hot manifolds or

moving fan blades.

8. If an extension cord is necessary, a cord with a

current rating equal to or more than that of the

equipment should be used. Cords rated for less

current than the equipment may overheat. Care

should be taken to arrange the cord so that it will

not be tripped over or pulled.

9. Keep guards and safety features in place and in

working order.

10. Wear proper clothing. Safety toe, non-slip foot-

wear and protective hair covering to contain hair

is recommended. Do not wear jewelry, loose

clothing, neckties, or gloves when operating the

balancer.

11. Keep work area clean and well lighted. Cluttered

and/or dark areas invite accidents.

12. Avoid dangerous environments. Do not use power

tools or electrical equipment in damp or wet loca-

tions, or expose them to rain.

13. Avoid unintentional starting. Be sure the balancer

is turned off and power disconnected before

servicing.

14. Disconnect the balancer before servicing.

15. Use only manufacturer’s recommended accesso-

ries. Improper accessories may result in personal

injury or property damage.

16. Repair or replace any part that is damaged or worn

and that may cause unsafe balancer operation. Do

not operate damaged equipment until it has been

examined by a qualified service technician.

17. Never overload or stand on the weight tray or any

part of the balancer.

18. Do not allow untrained persons to operate machin-

ery.

19. To reduce the risk of fire, do not operate equip-

ment in the vicinity of open containers or flam-

mable liquids (gasoline).

20. Adequate ventilation should be provided when

working on or operating internal combustion

engines.

21. Keep hair, loose clothing, fingers, and all parts of

body away from moving parts.

22. Use equipment only as described in this manual.

23. Use only manufacturer’s recommended attach-

ments and accessories.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 ... 33 34

Comments to this Manuals

No comments

Coats ProRide Wheel Balancer User Manual Page 2

Comments to this Manuals

Related products and manuals for Equipment Coats ProRide Wheel Balancer