Coats ProRide Wheel Balancer User Manual download pdf (Page 27)

Important: Always read and follow instructions. • 23

Figure 25 - Runout Diagnosis Screen

The following buttons are enabled:

Graphics

To display the graphs of the runout program.

Match Balance

To go into the Match Balance procedure.

Result Screen

To go to the result screen (the symbol above the button

is displayed in yellow to indicate an excessive

first harmonic eccentricity value).

If the first harmonic eccentricity is within the permitted

limit, the graphs can in any case be displayed by press-

ing the buttons

/ from the result screen:

Figure 26 - Radial eccentricity measurement graph:

Figure 27 - Radial and lateral eccentricity measurement graph.

BLUE GRAPH: represents the peak/peak eccentricity

whose actual value is displayed and updated by turning

the wheel in correspondence to the word “Cursor”.

RED GRAPH: represents the first harmonic eccentricity.

For a wheel in optimal conditions, this graph must come

close to a straight line.

Under result screen the following buttons are enabled:

➤ Match Bal.

To go to rim runout measurement.

➤ Print

To print the runout values measured (option).

➤ Exit

Return to the previous screen.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Coats ProRide Wheel Balancer User Manual Page 27