Coats ProRide Wheel Balancer User Manual download pdf (Page 24)

20 • Important: Always read and follow instructions.

Runout

Runout result screen.

Behind Spokes

Enable split function of out of balance (see Behind

Spokes).

Indicate Exact Corrective Weight Position

If laser disabled, indicates and locks arm when in

correct horizontal plane (see Indicate Exact Corrective

Weight Position).

Special Functions

Selection of special functions.

Balancing Spin

Lower hood, then spin wheel to check balance.

Stop & Exit

Return to Home screen

Behind Spoke

“Splitting” weight is used to hide any adhesive weights

behind the rim spokes.

Figure 20 - Behind Spoke Screen

Press button

LASER OFF: to split the out of balance detected in

two different positions, proceed as follows:

1. Position static out of balance or ALUS external side

in the correction position and press button :

2. Select a spoke close to the 12 o’clock position to

be corrected, move it into the 12 o’clock position and

press button .

3. Turn the wheel in the rotation direction indicated on

the out of balance display, bringing the second spoke to

the 12 o’clock position and press button .

Turn the wheel in direction of rotation.

Turn the wheel in reverse direction of rotation.

4. At this stage, the screen shows the graphic display

of the correction spokes with the relative weight of the

out of balance detected.

5. Position the spokes indicated on screen in the 12

o’clock position and correct with the value displayed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

No comments

Coats ProRide Wheel Balancer User Manual Page 24