Coats Kit 85607965 Lateral Sonar Kit User Manual download pdf

85607965 Lateral Sonar Kit

For use with COATS ProRide Wheel Balancer

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Kit Includes:

Tools Needed:

3/16 inch Drill Bit

11/16 inch Hole Saw or Drill Bit

Hex Keys 6 mm

3/8 Wrench

7/16 Wrench

Phillips Head Screw Driver

Instructions

1. Unplug balancer from power source.

2. Lean balancer back to gain access underneath the

chassis and place tire under sonar bar. Remove storage

pegs on front of balancer.

3. Place mounting plate on chassis; and align it with

the three holes for storage pegs. Next mark the center

of the last hole location. Drill a 11/16 hole in the chassis.

Be sure there is no obstruction inside the chassis.

3. Mount angle bracket with connector on the inside

of cabinet (as shown) using supplied nut and bolt.

Mounting Plate

w/ Hardware

Plugs

Hardware

Rubber

Grommet

Lateral Runout

Assembly w/

Cable & Sonar

Lean Chassis Back To

Gain Access Under Unit

Angle Bracket &

Connector

View From

Underneath Chassis

Use Mounting Plate as

Template for Drill Hole

Location

1 2

85607965 Lateral Sonar Kit 1

Summary of Contents

Page 1 - 85607965 Lateral Sonar Kit

Page 2

Comments to this Manuals

No comments

Coats Kit 85607965 Lateral Sonar Kit User Manual

Browse online or download User Manual for Equipment Coats Kit 85607965 Lateral Sonar Kit. COATS Kit 85607965 Lateral Sonar Kit User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Coats Kit 85607965 Lateral Sonar Kit