Coats Kit 85609017 Pneumatic Sleeve User Manual download pdf

85609017 Pneumatic Sleeve

For use with COATS ProRide Wheel Balancer

with Pneumatic Locking

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Pneumatic Sleeve

IMPORTANT: Always remove the wheel assembly

from the pneumatic shaft before disconnecting the air

supply from the machine.

Standard Back Cone Mounting Procedure

Using the Pneumatic Sleeve

Most original equipment and steel wheels can be

mounted properly using this method. The wheel is cen-

tered on a cone from the inner side of the hub.

1. Select the cone that best fits the center hole in the

wheel. Slide the cone onto the shaft with the large end

towards the faceplate.

2. Lift wheel onto the shaft and center it on the cone.

3. Attach the pressure cup to the pneumatic sleeve

and install the assembly onto the shaft.

4. Press down on the positioning pedal to mount the

wheel on the shaft. The wheel must be forced firmly

against the faceplate.

Pin-plate Mounting Procedure Using the

Pneumatic Sleeve

1. With the wheel off the balancer, check to see if the

pins mate precisely to the lug holes of the wheel.

2. Select the cone that best fits the center hole in the

wheel. Slide the cone onto the shaft with the large end

towards the faceplate.

3. Lift wheel onto the shaft and center it on the cone.

4. Slide the pin-plate assembly onto the shaft so the

pins mate to wheel lug holes.

5. Install the pneumatic sleeve onto the shaft. Be sure

the pneumatic sleeve is facing in the correct direction.

6. Press down on the positioning pedal to mount the

wheel on the shaft. The wheel must be forced firmly

against the faceplate.

Attach Pressure

Cup Here

Important: When using a pin-plate

adapter, turn this end of the Pneumatic

Sleeve to the balancer for proper

wheel mounting.

Faceplate

Cone

No-Mar

Ring

Pneumatic

Sleeve

Pressure

Cup

Rubber Lip

Important: When using a cone adapter,

turn this end of the Pneumatic Sleeve

to the balancer for proper wheel

mounting.

Faceplate

Cone

Pin-plate

Pneumatic

Sleeve

85609017 Pneumatic Sleeve 1

Summary of Contents

Page 1 - 85609017 Pneumatic Sleeve

Comments to this Manuals

No comments

Coats Kit 85609017 Pneumatic Sleeve User Manual

Browse online or download User Manual for Equipment Coats Kit 85609017 Pneumatic Sleeve. COATS Kit 85609017 Pneumatic Sleeve User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Coats Kit 85609017 Pneumatic Sleeve