Coats Kit 8113900 Monitor Replacement User Manual download pdf

XR1800 Monitor Replacement

Kit 8113900

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Disassembly Instructions

1. Turn Off power to balancer.

2. Unplug Touch Panel Ribbon Cable and remove

Monitor Housing.

3. Remove Touch Panel and Hardware and save for

installation on new Monitor Tray (8113742).

4. Unplug Monitor Video Cable at Main PCB. Unplug

Monitor Power Cable at Power PCB inside cabinet.

5. Remove Monitor, Monitor Base Plate, Elastic Cord,

and Cables. Set aside to ship back to Hennessy along

with Monitor Housing.

6. Remove and discard red ﬂat Base Plate under mon-

itor (8113271).

7. Remove and discard Grommet in circular slot of

Monitor Tilting Bracket.

Assembly Instructions

1. Assemble Touch Panel (removed from old monitor

housing) to front of new Monitor Tray (8113742).

2. Assemble adhesive backed Grip Strip (8113744) to

Monitor Plate (8113743), as shown.

3. Place Monitor Tray (8113742) on Tilt Bracket, route

Ribbon Cable in groove to Touch Panel and connect

under front edge of Tray. Connect Monitor Power Cable

at Power PCB and route through tower to back of

Monitor Tray.

4. Place Monitor Plate (8113743) with Grip Strip in

Monitor Tray and bolt Plate/Tray to Tilting Bracket using

1/2-13x2 Flat Head Socket Cap Screw with 1/2-inch Flat

Washer and 1/2-13 Nylok Nut under Tilt Bracket. Tighten

until Tray is difﬁcult to move side to side.

5. After feeding Monitor Video Cable through circular

slot in Tray and into Monitor Tower, place Monitor in

Tray. Make sure Monitor Cables ﬁt in slot under Monitor

at back of Tray and in channel at back of Monitor Plate.

Connect Monitor Power Cord at back of Monitor.

6. Connect Video Cable at Main PCB. Tie cables in

tower and main cabinet as required.

7. Power up machine. Turn On Monitor and adjust

screen as required.

Discard Grommet

Discard

Base Plate

Grip Strip

Monitor Plate

ouch Panel

nd Monitor Tray

Tilt Bracket

1/2" Washer

1/2-13 Nylok Nut

1/2-13 x 2"

Monitor

Power Cable

Monitor Plate

Monitor Tray

Touch Panel

and Monitor Tray

Tilt Bracket

Connect Under Here

Groove for

Ribbon Cable

Monitor

Power Cable

Monitor

Touch Panel

and Monitor Tray

Video Cable

Monitor

Power Cable

Slot for Cables

Channel

for Cables

Summary of Contents

Page 1 - Kit 8113900

Comments to this Manuals

No comments

Coats Kit 8113900 Monitor Replacement User Manual

Browse online or download User Manual for Equipment Coats Kit 8113900 Monitor Replacement. COATS Kit 8113900 Monitor Replacement User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Coats Kit 8113900 Monitor Replacement