Coats Kit 8113881 Printer Serive User Manual

Browse online or download User Manual for Equipment Coats Kit 8113881 Printer Serive. COATS Kit 8113881 Printer Serive User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
8113880 01 06/06 © COPYRIGHT 2004 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
PPrriinntteerr SSeerrvviiccee
KKiitt 88111133888811
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
Parts Identification
Ref. Qty. Description
1 1 Printer
2 3 Hook Type *Velcro
®
3 1 Loop Fabric *Velcro
®
Strip
4 2 Nylon Cable Tie
Instructions
1. Turn OFF power at machine.
2. Apply the adhesive-backed Velcro as follows:
a.) Apply two pieces of the Hook Type Velcro to bottom
front and back low point of the printer case between the
foot bumpers.
b.) Apply the strip of Loop Fabric Velcro to the lower
receptacle face of the duplex receptacle inside of the
cabinet.
c.) Apply one piece of the Hook Type Velcro to the
printer adapter on the prong side of the adapter at oppo-
site end.
3. Untie wiring at printer bracket, unplug RJ11 con-
nector on bottom of printer, and remove printer.
4. Remove old adapter at duplex receptacle inside
machine and plug in new adapter. Make sure the Velcro
strips match.
5. Place “Printer to Serial” connector in wiring tray
and plug into serial connector from main PCB, route
RJ11 connector cable through cable hole in back of cab-
inet to printer. (Tie wiring at back of printer bracket.)
Attach adapter to printer connector to serial connector
in wiring tray. Lay excess cable in bottom of wiring tray
and tie as necessary.
6. Install roll of ther-
mal paper in printer, plug
RJ11 connector into bot-
tom of printer, and place
printer on Velcro at
printer bracket.
Important: Software
will not recognize printer
connected unless paper
is installed and installed correctly. Install as shown
above and close cover.
* Velcro
®
is a registered trademark of Velcro Industries B.V.
Serial
Connector
in Wiring
Tray
Cable
Hole
Loop Fabric
Velcro
1
2
3
4
1
1
RJ11 Connector Plug
Remove
Old Printer
To Serial”
Connector
Install Roll of
Thermal Paper
Hook Type
Velcro
Hook Type
Velcro
Page view 0
1

Summary of Contents

Page 1 - KKiitt 88111133888811

8113880 01 06/06 © COPYRIGHT 2004 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.PPrriinntteerr SSeerrvviicceeKKiitt 88

Comments to this Manuals

No comments