Model H.I.T. 6000TRUCK TIRE CHANGERREAD these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a
8 • COATS Heavy Duty Tire Changer2. Lift Top Bead: Insert bead lifter under top bead to left of mount/demount tool and lift bead over lower blade of t
COATS Heavy Duty Tire Changer • 94. Position Tire: Lower table to a comfortable angle and rotate tool to approximately the 7 o’clock position. Lean t
10 • COATS Heavy Duty Tire ChangerSpecial Instructions for “Duplex” or “Super Single” TiresWheel Preparation: Remove valve core and allow tire to defl
COATS Heavy Duty Tire Changer • 117. Demount Bottom Bead: Lift bead over mount/demount head. Rotate tool clockwise to demount bot-tom bead.8. Remove
12 • COATS Heavy Duty Tire ChangerMaintenanceWARNINGBefore attempting any maintenance, discon-nect electrical power and air supply.
COATS Heavy Duty Tire Changer • 13CAUTIONLoss of power and/or excessive pump noise indicates low oil. Shut off machine imme-diately or damage to pump
8120583 03 07/2014 © Copyright 2010 Hennessy Industries and COATS® All Rights Reserved. Printed in USA
ii • COATS Heavy Duty Tire ChangerTable of ContentsSafety Instructions ...
COATS Heavy Duty Tire Changer • 1Safety InstructionsWARNINGFailure to follow danger, warning, and caution instructions may lead to serious personal i
2 • COATS Heavy Duty Tire ChangerSafety InstructionsWARNINGOnly properly trained personnel should ser-vice tires on the H.I.T. 6000. Read all safety a
COATS Heavy Duty Tire Changer • 3Installation Instructions Parts Box Check List Ref. Name Part No. Qty. Assembly Instructions 0 Fastener Packa
4 • COATS Heavy Duty Tire ChangerElectrical InstallationThe H.I.T. 6000 requires 220 volt, 3 phase or optional single phase power source. CAUTION: Onl
COATS Heavy Duty Tire Changer • 5Operating InstructionsTubeless Tire Bead LooseningRemove the valve core and allow tire to deflate com-pletely. Remov
6 • COATS Heavy Duty Tire ChangerWARNINGAllowing both shoes or one shoe and the rim stop to contact the rim during bead loos-ening may cause rim damag
COATS Heavy Duty Tire Changer • 73. Position Wheel: Roll wheel onto the safety skirt as close to the working top as possible. Position rim flange int
Comments to this Manuals