Coats 6401 Computer Truck Wheel Balancer User Manual download pdf (Page 12)

6 • COATS 6401 Truck Wheel Balancer

Direct Drive

Operating Overview

Control Panel

Keypad - User enters information and selects

function using these keys.

Wheel Measurement Display - Displays A, W,

and D values.

Wheel Offset (A) - The distance between the

inner rim flange and the edge of the balancer. Refer to

Offset on page 9 for detailed instructions.

Wheel Width (W) - The width of the rim between

the inner and outer rim flanges. Refer to Width on

page 10 for detailed instructions.

Wheel Diameter (D) - The diameter of the wheel

at the weight location. Refer to Diameter on page 10

for detailed instructions.

Calibrate - Places the balancer in the Calibrate

Mode. Press and hold the SHIFT key, and press 1.

Round Off - Toggles the balancer between the

high accuracy mode (0.01-ounce increments) and the

normal mode (0.25-ounce increments). Press and hold

the SHIFT key, and press 6.

Ounce/Gram - Toggles the balancer between

ounces or grams. Press and hold the SHIFT key, and

press 9.

Mode - Selects the desired balancing mode.

Balancing Modes - Press the MODE key to

select from the 4 available modes. The LED above the

mode will illuminate to indicate the mode is selected.

Start Button - Press to start a spin cycle.

Weight Displays - Indicate the weight amount to

be attached to the wheel.

Weight Position LEDs - Center LEDs flash when

correct weight position is at top-dead-center.

3 4 5

TRUCK

DYNAMIC

TRUCK

STATIC

DYN

CAR

DYN

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Coats 6401 Computer Truck Wheel Balancer User Manual Page 12

Comments to this Manuals

Related products and manuals for Equipment Coats 6401 Computer Truck Wheel Balancer