Coats 520 Wheel Lift User Manual download pdf (Page 8)

4. Move the toggle switch upward (Position 1). The

wheel will be clamped between the upper and

lower wheel clamps and raised to the height of

the balancer stub shaft.

During this operation, do

not put your hands on the

top of the wheel. Your

hands could be pinched between the wheel and

the clamp.

5. Use the handle, labeled item 2 in Fig. H, to

move the upright, labeled item 6 in Fig. H, for-

ward until the wheel is on the balancer stub

shaft and ready to be mounted on the balancer.

6. Secure the wheel to the balancer using suitable

mounting adapters.

7. Move the toggle switch, labeled item 1 in Fig. H,

to the center (Position 0) to release the wheel

from the clamps.

8. Move the upright, labeled item 6 in Fig. H, back-

ward to free the wheel balancer work area.

9. Balance the wheel.

10. Move the upright, labeled item 6 in Fig. H, for-

ward until the wheel clamps, labeled items 4 & 5

in Fig. H, are positioned on the wheel.

11. Move the toggle switch up (Position 1) to clamp

the wheel between the wheel clamps.

During this operation, do

not put your hands on the

top of the wheel. Your

hands could be pinched between the wheel and

the clamp.

12. Remove the wheel from the balancer stub shaft.

13. Move the upright backward to create the space

needed to unload the wheel.

14. Move the toggle switch, labeled item 1 in Fig. H,

down (Position 2) to lower the wheel and

release it from the clamps.

15. Turn the wheel by hand until it comes out of the

lower wheel clamp.

6 • 520 Wheel Lift

DANGER

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Coats 520 Wheel Lift User Manual Page 8