Coats RC-100 Tire Changer User Manual download pdf (Page 10)

6 • Important: Always read and follow operating instructions.

10. Insert the smooth curved end of the bead lifting

tool over the forward end of the demount tool and

below the top bead of the tire. Use your free hand to

press down on the tire opposite the tool to help with

tool insertion (Figure 9).

Figure 9 - Insert Bead Lifting Tool

11. Rotate the bead lifting tool down towards the

wheel to lift the tire bead up and over the knob portion

of the demount tool. The tool may be removed if desired

(Figure 10).

Figure 10 - Lift Bead Over Demount Tool

12. Depress the table top pedal to rotate the wheel

clockwise. The demount tool will guide the upper bead

up and over the edge of the wheel.

NOTE: Push down on the tire across from the demount

tool during table top rotation to utilize the drop center

area of the wheel. This reduces the tensional force on

the bead during demount.

13. Lift and hold the tire at an angle so that the lower

bead is resting in the drop center directly across from

the demount tool, and is loose below the demount tool

(Figure 11). Insert the smooth curved end of the bead

lifting tool down over the forward end of the mount/

demount tool and below the lower bead. Lift the bead

up and over the knob on the demount tool (Figure 11).

Figure 11 - Demounting Lower Bead

14. Depress the table top pedal to rotate the wheel.

The demount tool will guide the bead up and over the

edge of the wheel. Continue rotation until lower bead

is demounted.

NOTE: With tube-type tires, demount the upper bead

and remove the tube before demounting the lower

bead.

NOTE: Table top rotation can be stopped at any time

by removing your foot from the pedal.

NOTE: Normal table top rotation for demounting is

clockwise. Depress the table top pedal to rotate this

direction. To rotate the table top counterclockwise, lift

the pedal up with your toe.

CAUTION

At times during the mounting and demount-

ing procedure, the bead lifting tool may

encounter resistance or come under load.

Keep one hand firmly on the tool to avoid

possible tool disconnect. Use the reversing

feature to back out or jam ups..

Motorcycle

ATV

Motorcycle

ATV

Motorcycle

ATV

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Coats RC-100 Tire Changer User Manual Page 10

Comments to this Manuals

Related products and manuals for Equipment Coats RC-100 Tire Changer