Coats Fixed Finger Plates User Manual download pdf

Instructions

1. Using a hole gauge, position the hole gauge

probes firmly into consecutive wheel lug holes and

tighten the lock screw.

2. Remove the hole gauge and read the scale that

matches up with the number of lug holes as the wheel.

The measuring surface of the hole gauge lines up with

the scale mark that indicates the bolt circle pattern. Find

the fixed finger plate with the indicated bolt circle pat-

tern (see page 2)

3. Select the cone that best fits the center hole in the

wheel. Slide the back cone spring and the cone onto

the balancer shaft.

4. Lift the wheel onto the shaft and center it on the cone.

5. Next, align the fixed finger plate’s fingers with the

wheel lug holes.

6. Install the hub nut onto the shaft. Tighten securely.

Follow wheel balancer manufacturer’s recommended

procedure for balancing tires.

Fixed Finger Plates

Mounting Wheels Using Fixed Finger Plates

8113016 06 03/11 1 of 2

Number of

Lug Holes

Bolt Circle

Pattern

Scale Marks

Measuring

Surface

Scales

1 2

Instructions1. Using a hole gauge, position the hole gaugeprobes firmly into consecutive wheel lug holes andtighten the lock screw.2. Remove the hole

Page 2

No comments

Coats Fixed Finger Plates User Manual