Coats 4050A Tire Changer User Manual download pdf (Page 15)

Installation Instructions

Proper unit installation

is necessary for safe

use and efficient

operation. Proper installation also helps protect

the unit from damage and makes service easier.

Always place safety poster and instructions near

the unit.

Location

Select a location using the drawings below. The

area should provide the operator with enough

space to use the equipment in a safe manner. The

area selected should be well lit, easy to clean and

should be away from oil, grease, brake lathe chips,

etc. Avoid areas where bystanders and customers

may be present.

Workspace Requirements

Air Source

The unit requires a 5 CFM air source at 150 PSI.

The safe operating pressure range is between 110

PSI and 175 PSI at the machine.

The unit is furnished with a 1/4" pipe thread male

fitting for easy connection. This connection is

located on the right side of the rear of the

machine. A 1/4" ID hose (or pipe) for connection to

the machine is satisfactory. Sufficient air pressure

assures good performance.

Floor Mounting

The machine may be mounted to the floor if

desired. Use suitable anchors in the mounting

holes at each corner of the machine.

COATS 4050A Tire Changer •

CAUTION

1 2 ... 10 11 12 13 14 15 16

No comments

Coats 4050A Tire Changer User Manual Page 15