Coats Kit 8110584, Pressure Limiter User Manual download pdf

Pressure Limiter Kit 8110584

Installation Instructions & Parts List

for RC-15A, RC-15AA, RC-20A, RC-20AA

& 40-40 Tire Changers

Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Installation Instructions

Always DISCONNECT THE ELECTRICAL

POWER before servicing equipment. This

prevents electrical shock or accidental

movement of the systems operated by the

electrical power.

Always DISCONNECT AIR SUPPLY before

servicing equipment. This prevents acciden-

tal movement of systems operated by com-

pressed air which may result in personal

injury. BLEED THE AIR SYSTEM by actuating

all the valves.

Before beginning any work, clear the area and position

machine for easy access. Disconnect all power

sources, both air and electricity inputs. Allow any stored

air in the reservoir to escape by depressing the inflate

pedal.

RC-15A and 15AA Pressure Limiter:

1. Remove the side panel.

2. Remove two nuts (ref 1), securing inflation valve

bracket (ref 2) to chassis.

3. Mount pressure limiter bracket (ref 3) to existing

bolts (ref 4) and securely tighten two nuts (ref 1).

4. Install pressure limiter (ref 5) to pressure limiter

bracket (ref 3) using two 1-3/4-inch long bolt (ref 6) and

two nuts (ref 7) provided in kit. Fasten securely.

5. Remove 1/4-inch hose (ref 8) from small valve (ref

9) and connect to port B on pressure limiter (ref 5).

6. Connect 1/4-inch hose 20-inches long (ref 10) sup-

plied in kit to port A on small valve (ref 9) and port A on

pressure limiter (ref 5). Securely tighten using 1/4-inch

hose clamps provided in kit.

7. Check all connections for proper installation and

tightness prior to reconnecting air supply.

8. Check unit for proper operation. Refer to the pres-

sure limiter maintenance section on page 4 of this

instruction.

9. Remove lens cover from

air gauge and install new

decal to gauge as shown in

diagram. Reinstall lens cover.

10. Replace side panel.

11. Review proper tech-

nique and operation with the

operators and supervisors.

CAUTION

1 2 3 4

Summary of Contents

Page 1 - Pressure Limiter Kit 8110584

Page 2

RC-20A and 20AA Pressure Limiter:1. Remove the side panel.2. Mount pressure limiter bracket (ref 1) to inflationbracket (ref 2) using two 1/4-inch bol

Page 3

5. Attach 37-inch long hose (ref5) to pressure limiter port B.Attach quick coupler end toend of 37-inch longhose. Securely fas-ten all clamps.Reattach

Page 4 - Pressure Limiter Maintenance

Pressure Limiter MaintenanceOperating a tire changer with a defective,improperly adjusted, or by-passed pressurelimiter could cause an operator to acc

Comments to this Manuals

No comments

Coats Kit 8110584, Pressure Limiter User Manual

Browse online or download User Manual for Equipment Coats Kit 8110584, Pressure Limiter. COATS Kit 8110584, Pressure Limiter User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Coats Kit 8110584, Pressure Limiter